[1]LU J, LIU P, BIJAN B. Safety evaluation of freeway exit ramp[C]//TRB 2007 Annual Meeting CD-ROM (07-1293). [2]CHEN H Y, LIU P. BIJAN B, et al. Impacts of exit ramp type on the safety performance of freeway diverge areas[C]//TRB 2007 Annual Meeting CD-ROM (07-1291). [3]Newell G F. Delays caused by a queue at a freeway exit ramp[J]. Transportation Research, PartB, 1999: 337-350. [4]Zhou H. Computer simulation analysis of the impacts exit ramp length on exit ramp delay[R]. Center for Urban Transportation Research, University of South Florida, Tampa, Florida, 2004. [5]熊烈强,李杰.匝道连接点通行能力的研究现状和发展趋势[J].交通科技,2004(6): 69-72.[XIONG L Q, LI J. Development trend and current situation on capacity of ramp-way junction[J]. Transportation Science & Technology, 2004(6): 69-72.] [6]熊烈强,邵春福,王富,等. 出口匝道连接处通行能力分析计算模型[J].北京交通大学学报,2005,3(29): 70-72.[XIONG L Q, SHAO C F, WANG F, et al. Model of analysis and calculation off-ramp capacity of expressway[J]. Journal of Northern Jiao tong University, 2005, 3(29): 70-72.] [7]李文权, 王炜, 邓卫,等. 高速公路加速车道上车辆的汇入模型[J]. 中国公路学报, 2002, 15(2): 95-98.[LI W Q, WANG W, DENG W, et al. Merging model of vehicle on freeway acceleration lane[J]. China Journal of Highway and Transport, 2002, 15(2): 95-98.] [8]李文权, 王炜, 李铁柱, 等. 高速公路加速车道上车辆的汇入特征分析[J]. 东南大学学报(自然科学版), 2002, 32(2): 252-255.[LI W Q, WANG W, LI T Z, et al. Characteristics analyses of merges on freeway acceleration lane[J]. Journal of Southeast University(Natural Science Edition), 2002, 32(2): 252-255.] [9]李文权, 王莉, 王炜. 高速公路上匝道合流区通行能力经验模型[J]. 交通运输工程学报, 2004, 4(2): 80-84.[LI W Q, WANG L, WANG W. Empirical highway capacity model of on-ramp junction[J]. Journal of Traffic and Transportation Engineering, 2004, 4(2): 80-84.] [10]李嘉,方霞.高速公路出入口设计与安全性研究[J]. 中南公路工程, 2003,2(28):31-34.[LI J, FANG X. Study on design and safety of freeway exit and entrance[J]. Central South Highway Engineering, 2003, 2(28):31-34.] |